Acid silicone glass glue to glass, aluminum, PVC granite adhesion and most plastic products, has a good sealing effect. Can be applied to metal and plastic, aluminum alloy doors and Windows, shop Windows, skylights, between plastic, between glass sealing leakage, but can not be used for structural glass assembly. Improve plastic processing fluidity and release, reduce torque, reduce equipment wear, mold filling capacity, reduce product defect rate, significantly reduce friction coefficient, improve smoothness, improve surface luster, improve surface silky touch, improve scratch resistance; Improve flame retardant, reduce smoke density, improve the impact strength of flame retardant material (high filling) and surface gloss, with good stability and non-migration.

A wide range of bonding, for most of the building materials such as glass, aluminum, oil-free wood has excellent bonding property. But can not be used for bonding ceramic, marble, etc.

 

Raw material composition：

Silicone sealant= Polyvinyl formaldehyde + silicone oil + white oil + calcium powder + additives

 

 

 

Features：

Great adhesion for sealing instead of metal, glass, wood or ceramic. Good elasticity,resists to conventional cleaning products easy to apply.

Limitations?Do not apply in masonry or oily woods. Not painted.Not recommended for acrylic, galvanized polycarbonate and polyethylene sheets. Not a structural sealant 

 

Constructions for use:

l.Clean and dry the surface, place masking tape or both sides of the joint, cut the tip of the cartridge thread. screw the pipette well into the thread.

2.Cut the pipette to the desired diameter. Place the cartridge in a caulk gun.

3. Apply the silicone by keeping the gun at an angle of 45 degrees.

4.Review the silicone immediately using a wet spatula or a plastic spoon.

5.Remove the masking tape and clean the excess silicone with a solvent before it dries.

6.The dry silicone to the touch in 10 minutes. forms a film in 15 minutes and cures in 24 hours depending on the environmental conditions and the size of the gasket.

 

Performance:

7 linear meters on a 6mm x 6mm

 

Joint Storage:

Keep at less than 32 C (90 F) in a dry place

 

Precautions:

Uncured products can cause skin and eye irritation.In case of contact with the skin and eyes immediately wash with plenty of water for 15 minutes. If the irritation persists consult your doctor.

 

Shelf life:

12 months